001×10 Styrene Series Gel Strong Acid Cation Exchange Resins

Gallery Images

Product Line Description

001×10 is a premium high purity grade of conventional gel poly(styrene sulfonate) cation-exchange resin, Its chemical and physical stability, particularly its resistance to oxidation. The higher density spheres of the graded cation resin ensures good backwash separation at the recommended flow rates.It is used in hard water softening and demineralization, Sugar solution demineralization, antibiotics extracting, separation and purification of biochemicals and so on.

Brands HUAMO
Typical Physical and Chemical Properties
Polymer Matrix Structure Crosslinked Polystyrene Divinylbenzene
Physical Form and Appearance Brown Yellow Color Spherical Beads
Functional Groups R-SO3
Ionic Form (As Shipped) Na+
Sodium (Na+) Form, Wet, Volumetric Total Capacity ≥ 2.2 eq/l min
Sodium (Na+) Form Moisture Retention 40 to 45 %
Particle Size Range 0.3 to 1.2 mm
Maximum Percentage (%) for < 0.5 Millimeter (mm) Particle Size 1 %
Maximum Uniformity Coefficient 1.7
Effective Size 0.4 to 0.9 mm
Maximum Reversible Swelling Sodium (Na+) → Hydrogen (H+) 6 %
Approximate Shipping Weight 820 to 860 g/L
Moist Sodium (Na+) Form Specific Gravity 1.3
Potential of Hydrogen (pH) Stability Range 0 to 14 pH
Suggested Operating Condition
Sodium (Na+) Form Maximum Temperature 140 ºC
285 ºF
Hydrogen (H+) Form Maximum Temperature 120 ºC
248 ºF
Backwash Rate (Bed Expansion) 25 to 50 %
Regenerant Concentration (Hydrogen Cycle – Hydrogen Chloride (HCl)) 3 %
Regenerant Concentration (Hydrogen Cycle – Hydrogen Sulfate (H2SO4)) 2 to 3 %
Regenerant Concentration (Sodium Cycle – Sodium Chloride (NaCl)) 6 to 8 %
Regenerant Concentration (Sodium Cycle – Sodium Hydroxide (NaOH)) 3 %
Regenerant Dosage (Hydrogen Chloride (HCl) or Hydrogen Sulfate (H2SO4)) Hydrochloric Acid (HCl) or Hydrogen Sulfate (H2SO4) Volume:Resin Volume = 3:1
Regenerant Dosage (Sodium Chloride (NaCl)) Sodium Chloride (NaCl) Volume:Resin Volume = 2:1
Regenerant Dosage (Sodium Hydroxide (NaOH)) Sodium Hydroxide (NaOH) Volume:Resin Volume = 3:1
Regenerant Flow Rate 2 to 4 BV/h
Regenerant Contact Time At Least 40 min
Service Flow Rate 10 to 25 mph